Shop - Model trimmer dh1 – diamond disc

Description

Family of high performance model trimmers, designed for intensive use in the dental lab. Reliability, robustness and durability are their best presentation. These trimmers can stand the most demanding and hardest working conditions.

They are precision machines with which you can carry out trimming works quickly and easily. The trimmers of the Classic family are an excellent option for those professionals looking for a long lasting machine, of low maintenance and bomb-proof reliability. In short, a family able to meet the expectations of the most demanding professionals for many, many years.

The MESTRA model trimmer is a strong and robust machine, featuring the latest improvements and innovations required by a machine of these characteristics. Its robustness can be seen at a glance and its weight of more than 21 kg (maximum on machines of this type) added to the use of non slip rubber feet assures perfect stability during facing operations.

The disc is well balanced, which guarantees a completely smooth operation. Vibrations are unnoticeable.

It runs noiselessly as the special resin wheel is carefully balanced. The wheel is mounted on an aluminium plate, thus achieving a larger working areea as it has no shaft or external nut hinder grinding operation in this area.

The motor is provided with guards, giving a more compact and harmonious appearance, while ensuring safe operation, reventing any possible accident.

The MESTRA trimmer is equipped with an electrovalve for electronic feed of water by pressing a switch. This switch is protected with a PVC insulating cover to prevent any electric shock due to humidity.

It is also provided with an earth cable.

Water flow is directly adjusted from the machine through an adjustment valve.

The drainage system is of lateral type, designed to prevent clogging as drain hole is oversized 30 mm and the water carrying plaster particles is driven outward by air turbulence generated by the wheel.

The component supporting the patterns is of tilting type with three positions.

The motor is monophasic, and is insulated from the wet area of the machine by means of a retainer with a stainless steel spring for a perfect fit on motor shaft end. The motor shaft is made of hardened and ground stainless steel.

The MESTRA model trimmer is entirely made of aluminium ex cepting a few components which are made of stainless steel. The machine is painted with epoxy paint, and always looks as good as new.

Similar features of the previous trimmer, but with a diamond disc. The diamond disc, if used properly, has a much longer working life. Besides, the trimming surface is maintained completely lat, with no wear-scratches. Its price, however, is higher.

CAUTION!
Diamond discs are very heat-sensitive:do not trim or rectify metal pieces or coatings.

Details

Large, 120 mm working window to facilitate the cutting of large models, enabling better use of the disc.

Front-mounted water flow adjustment tap.

Electrovalve for automatic water inflow when the main switch is engaged.

Easy-to-extract, 3-position, fold-down table (80, 90 & 100º). Marked for referencing trimming on precision models.

Large, side-mounted drainage system. Water with plaster is expelled by the turbulance caused by the grinding wheel.

Safety switch: if electricity fails the unit is disconnected and must be manually reset (thus preventing accidental start-up).

Technical features

Monophasic motor

Voltage: 230 V, 50/60 Hz

Power: 800 W

Disc diameter: 250/254 mm

Speed: 1500 rpm

Capacitor: 12 μF 450 V

Height: 345 mm

Width: 310 mm

Depth: 450 mm

Weight: 21 kg

Accesories

DISCS